Record players are great devices to listen to music.
They provide a convenient way to enjoy your favorite tunes without having to worry about carrying around bulky speakers. However, they also come with their share of issues.
Have you ever wondered why your record player sounds bad, weird, or distorted?
There are five main causes of poor sound quality from a record player. Read on to find out what they are, and how to fix them.
Your Records Are Damaged And/Or Dirty
Dust and dirt tend to accumulate on your records over time.
This can cause the grooves in the vinyl to wear down, which results in scratches and other damage that will affect the sound quality, and makes them hard to play smoothly.
If you notice the sound becoming worse after a period of time, you should clean your record collection.
To keep your records in good condition, make sure that you store them properly. You should never leave them lying flat on a table or shelf.
Instead, place them vertically so that they don’t get damaged by dust particles. Also, use a soft cloth to clean off any dust particles before playing your records.
Additionally, you need to clean your records regularly. You can use a damp cloth to wipe away dust and dirt.
It is recommended that you do this every week, or at least once a month, or else your records will start sounding scratchy.
Finally, handling your records carefully will avoid scratches and damage.
If you handle them carelessly, you may end up damaging them permanently. Take care while storing your records, as well as when transporting them.
The Speakers Are Poorly Tuned And/Or Poor Quality
The most common problem associated with record players is poor-quality speakers. The speakers used in record players are usually small and low-powered.
These speakers are not designed to produce high volumes of sound.
In addition, the speakers are often placed close to each other, making it difficult to achieve stereo separation.
This means that if one speaker produces a certain volume of sound, all the others will be affected. As a result, the sound produced by the entire system will be weak and muffled.
If your speakers aren’t properly tuned, the audio may be distorted. You can check whether your speakers are well-tuned by listening to a song through them.
If it sounds too low or too high, you’ll know that something needs to be done.
To ensure that your speakers are in tune, you should set up a test using a metronome and a tuning fork.
Then, adjust the volume until both sounds are equally loud. Once you’ve found the correct level, you can proceed to the next step.
Next, try adjusting the equalizer settings to see if there’s anything wrong with your system. If the problem persists, you could consider replacing your speakers.
You can adjust the volume levels of your speakers using the volume control knob on your stereo system. Alternatively, you can connect them to a separate amplifier.
The Belt Is Dirty And/Or Damaged
Dirty belts on a record player can cause skipping. To prevent this from happening, you should clean the belt regularly.
To clean the belt, first remove the cover from the record player. Next, take out the belt and wash it thoroughly with water.
Finally, dry it completely before putting it back into position.
Another way to prevent skipping is to replace the belt periodically. You can buy new ones for about $10-$20.
However, if you’re looking for a more economical option, you can also purchase an old belt and cut it down to size.
However, you should only replace it if it has been worn out for some time. Otherwise, you risk causing more issues than solving them.
If the issue persists even after cleaning, you should contact an expert for help. They can advise you on how best to solve the problem.
Avoid playing records on a dirty belt, as they may become permanently damaged.
The Spindle Motor Is Broken
A spindle motor is what spins the record around. It consists of two parts: a turntable and a motor.
A broken spindle motor can make your record player malfunction, causing the turntable to skip and distort the music played.
If you notice any unusual noises coming from your record player, then you should immediately stop playing the record and call someone who specializes in repairing these types of systems.
The good news is that you don’t need to pay a lot of money to get your record player fixed.
It’s important to note that you shouldn’t attempt to fix a broken spindle motor yourself unless you have previous experience doing so, as this could lead to further damage.
It’s possible that the spindle motor was damaged during shipping. In such instances, you’ll be required to send the item back to the manufacturer.
This may cost you money, but you’ll receive a replacement part at no charge, and you won’t have to worry about fixing it yourself.
If you’re not sure whether your record player requires repair, you can ask your local store for advice. They will be able to tell you whether your machine needs work.
Until then, avoid playing records on it.
Your Turntable Has Not Been Placed On A Secure Surface
This is the easiest issue to fix out of the five problems mentioned above, as it does not require professional help.
All you need to do is ensure that your record player is placed on a solid surface. If your turntable isn’t level and securely placed, it could lead to distortion and skipping.
For example, if it’s resting on top of a table, it might wobble when you play a record.
This is because the turntable cannot maintain its stability while being moved by the vibrations caused by the record.
You should place your turntable on a flat surface, preferably one made of wood. If you use a wooden table, you’ll want to put a mat underneath it.
Make sure that the mat is thick enough to keep the floor steady.
Another option is to fasten your record player to a wall with screws. This will provide extra support for the turntable.
However, you must make sure that the screws are strong enough to hold up the weight of the turntable.
You should also make sure that your record player is properly aligned. If it’s not, it could cause additional problems.
Therefore, you should check the alignment before using it.
You can do this by placing a piece of paper under the turntable and making sure that the needle doesn’t touch the edge of the paper.
If it does, then there’s something wrong with the alignment.
If you’ve tried all of the tips presented here without success, then you might want to consider getting your record player repaired by a professional.
The last thing you want is to spend time trying to fix it yourself only to realize that it’s beyond repair.
Hopefully, you have identified where the concern lies by reading through our list of potential causes.
Once you know what the issue is, you can take steps to prevent it from happening again, or at least minimize the chances of it occurring.